document number: 94028 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 28-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultralow v f hyperfast rectifier for discontinuous mode pfc, 8 a fred pt ? vs-8etl06pbf, vs-8etl06fppbf vishay semiconductors features ? hyperfast recovery time ? benchmark ultralow forward voltage drop ? 175 c operating junction temperature ? low leakage current ? fully isolated package (v ins = 2500 v rms ) ? ul e78996 pending ? compliant to rohs directive 2002/95/ec ? designed and qualified for industrial level description state of the art, ultralow v f , soft-switching hyperfast rectifiers optimized for discon tinuous (critical) mode (dcm) power factor correction (pfc). the minimized conduction lo ss, optimized stored charge and low recovery current mini mize the switching losses and reduce over dissipation in the switching element and snubbers. the device is also intended for use as a freewheeling diode in power supplies and other power switching applications. applications ac/dc smps 70 w to 400 w e.g. laptop and printer ac adaptors, desktop pc, tv and monitor, games units and dvd ac/dc power supplies. product summary package to-220ac, to-220fp i f(av) 8 a v r 600 v v f at i f 1.05 v t rr typ. 60 ns t j max. 175 c diode variation single die to-220ac to-220 full-pak anode 1 3 cathode base cathode 2 anode 1 3 cathode vs-8etl06pbf vs-8etl06fppbf absolute maximum ratings parameter symbol test conditions values units repetitive peak reverse voltage v rrm 600 v average rectified forward current i f(av) t c = 160 c 8 a full-pak t c = 142 c non-repetitive peak surge current i fsm t j = 25 c 175 repetitive peak forward current i fm 16 operating junction and storage temperatures t j , t stg - 65 to 175 c electrical specifications (t j = 25 c unless otherwise specified) parameter symbol test conditions min. typ. max. units breakdown voltage, blocking voltage v br , v r i r = 100 a 600 - - v forward voltage v f i f = 8 a - 0.96 1.05 i f = 8 a, t j = 150 c - 0.81 0.86 reverse leakage current i r v r = v r rated - 0.05 5 a t j = 150 c, v r = v r rated - 20 100 junction capacitance c t v r = 600 v - 17 - pf series inductance l s measured lead to lead 5 mm from package body - 8.0 - nh
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 94028 2 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 28-apr-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vs-8etl06pbf, vs-8etl06fppbf vishay semiconductors ultralow v f hyperfast rectifier for discontinuous mode pfc, 8 a fred pt ? fig. 1 - typical forward voltage drop characteristics fig. 2 - typical values of reverse current vs. reverse voltage dynamic recovery characteristics (t c = 25 c unless otherwise specified) parameter symbol test conditions min. typ. max. units reverse recovery time t rr i f = 1 a, di f /dt = 100 a/s, v r = 30 v - 60 100 ns i f = 8 a, di f /dt = 100 a/s, v r = 30 v - 150 250 t j = 25 c i f = 8 a di f /dt = 200 a/s v r = 390 v - 170 - t j = 125 c - 250 - peak recovery current i rrm t j = 25 c - 15 - a t j = 125 c - 20 - reverse recovery charge q rr t j = 25 c - 1.3 - c t j = 125 c - 2.6 - thermal - mechanical specifications parameter symbol test conditi ons min. typ. max. units maximum junction and storage temperature range t j , t stg - 65 - 175 c thermal resistance, junction to case r thjc -1.42 c/w (full-pak) - 3.4 4.3 thermal resistance, junction to am bient per leg r thja typical socket mount - - 70 thermal resistance, case to heatsink r thcs mounting surface, flat, smooth and greased -0.5- weight -2.0- g -0.07- oz. mounting torque 6.0 (5.0) - 12 (10) kgf cm (lbf in) marking device case style to-220ac 8etl06 case style to-220 full-pak 8etl06fp 1 10 t j = 175 c t j = 150 c t j = 25 c 0.4 0.8 v f - forward voltage drop (v) i f - instantaneous forward current (a) 100 1.2 1.6 2.0 0.1 0.01 0.1 1 10 100 100 200 400 v r - reverse voltage (v) i r - reverse current (a) 300 0.001 600 500 t j = 175 c t j = 150 c t j = 125 c t j = 100 c t j = 25 c t j = 50 c t j = 75 c
vs-8etl06pbf, vs-8etl06fppbf ultralow v f hyperfast rectifier for discontinuous mode pfc, 8 a fred pt ? vishay semiconductors document number: 94028 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 28-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 3 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - typical junction capacitance vs. reverse voltage fig. 4 - maximum thermal impedance z thjc characteristics fig. 5 - maximum thermal impedance z thjc characteristics (full-pak) 100 0 200 400 500 600 10 v r - reverse voltage (v) c t - junction capacitance (pf) 300 100 t j = 25 c 0.01 0.1 10 0.00001 0.0001 0.001 0.01 0.1 1 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) . . p dm t 1 t 2 notes: 1. duty factor d = t 1 /t 2 2. peak t j = p dm x z thjc + t c 1 single pulse (thermal resistance) d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01 0.01 0.1 10 0.00001 0.0001 0.001 0.01 0.1 1 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) . . p dm t 1 t 2 notes: 1. duty factor d = t 1 /t 2 2. peak t j = p dm x z thjc + t c 1 single pulse (thermal resistance) 10 100 d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 94028 4 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 28-apr-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vs-8etl06pbf, vs-8etl06fppbf vishay semiconductors ultralow v f hyperfast rectifier for discontinuous mode pfc, 8 a fred pt ? fig. 6 - maximum allowable case temperature vs. average forward current fig. 7 - maximum allowable case temperature vs. average forward current (full-pak) fig. 8 - forward power loss characteristics fig. 9 - typical reverse recovery time vs. di f /dt fig. 10 - typical stored charge vs. di f /dt note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 8); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = rated v r 02 6 10 14 allowable case temperature (c) i f(av) - average forward current (a) 150 160 48 165 170 175 180 155 square wave (d = 0.50) rated v r applied see note (1) dc 12 02 6 10 14 allowable case temperature (c) i f(av) - average forward current (a) 80 100 48 120 140 160 180 square wave (d = 0.50) rated v r applied see note (1) dc 12 02 6 1012 average power loss (w) i f(av) - average forward current (a) 0 4 d = 0.01 d = 0.02 d = 0.05 d = 0.10 d = 0.20 d = 0.50 dc rms limit 48 8 12 10 6 2 100 1000 t rr (ns) di f /dt (a/s) 450 0 i f = 16 a i f = 8 a v r = 390 v t j = 125 c t j = 25 c 400 300 200 100 50 150 250 350 100 1000 q rr (nc) di f /dt (a/s) 5000 500 i f = 16 a i f = 8 a 3500 2500 1500 1000 v r = 390 v t j = 125 c t j = 25 c 4500 3000 2000 4000
vs-8etl06pbf, vs-8etl06fppbf ultralow v f hyperfast rectifier for discontinuous mode pfc, 8 a fred pt ? vishay semiconductors document number: 94028 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 28-apr-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 5 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 11 - reverse recovery parameter test circuit fig. 12 - reverse recovery waveform and definitions irfp250 d.u.t. l = 70 h v r = 200 v 0.01 g d s di f /dt adju s t q rr 0.5 i rrm di (rec)m /dt 0.75 i rrm i rrm t rr t b t a i f di f /dt 0 (1) (2) (3) (4) (5) (1) di f /dt - rate of change of current through zero cro ss ing (2) i rrm - peak rever s e recovery current (3) t rr - rever s e recovery time mea s ured from zero cro ss ing point of negative going i f to point where a line pa ss ing through 0.75 i rrm and 0.50 i rrm extrapolated to zero current. (4) q rr - area under curve dened by t rr and i rrm t rr x i rrm 2 q rr = (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr
www.vishay.com for technical qu estions within your region, please contact one of the fo llowing: document number: 94028 6 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com revision: 28-apr-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vs-8etl06pbf, vs-8etl06fppbf vishay semiconductors ultralow v f hyperfast rectifier for discontinuous mode pfc, 8 a fred pt ? ordering information table links to related documents dimensions to-220ac www.vishay.com/doc?95221 to-220ac full-pak www.vishay.com/doc?95005 part marking information to-220ac www.vishay.com/doc?95224 to-220ac full-pak www.vishay.com/doc?95009 1 - vishay semiconductors product 2 - current rating (8 = 8 a) 3 - e = single diode 4 - t = to-220, d 2 pak 5 - l = ultralow v f hyperfast recovery 6 - voltage rating (06 = 600 v) 7 - none = to-220ac fp = to-220 full-pak - pbf = lead (pb)-free 8 tube standard pack quantity: 50 pieces device code 5 1 3 2 4 6 7 8 vs- 8 e t l 06 fp pbf
outline dimensions www.vishay.com vishay semiconductors revision: 20-jul-11 1 document number: 95005 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters 5 0.5 3.3 3.1 5 0.5 0.9 0.7 2.54 typ. 2.54 typ. 10.6 10.4 3.7 3.2 7.31 6.91 0.61 0.38 2.85 2.65 2.8 2.6 1.4 1.3 10 4.8 4.6 16.0 15.8 16.4 15.4 (2 places) r 0.7 r 0.5 hole ? 3.4 3.1 typ. 1.15 1.05 13.56 13.05 lead assignments diode s 1 + 2 - cathode 3 - anode conforms to jedec outline to-220 full-pak
document number: 95221 for technical ques tions within your region, please cont act one of the following: www.vishay.com revision: 07-mar-11 diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com 1 to-220ac outline dimensions vishay semiconductors dimensions in millimeters and inches notes (1) dimensioning and tolerancin g as per asme y14.5m-1994 (2) lead dimension and fini sh uncontrolled in l1 (3) dimension d, d1 and e do not in clude mold flash. mold flash shall not exceed 0.127 mm (0. 005") per side. these dimensions are m easured at the outermost extrem es of the plastic body (4) dimension b1, b3 and c1 apply to base metal only (5) controlling dimension: inches (6) thermal pad contour optional with in dimensions e, h1, d2 and e1 (7) dimension e2 x h1 define a zone where stamping and singulation irregularities are allowed (8) outline conforms to jedec to-220, d2 (minimum) where dimensions are derived from the actual package outline symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.25 4.65 0.167 0.183 e1 6.86 8.89 0.270 0.350 6 a1 1.14 1.40 0.045 0.055 e2 - 0.76 - 0.030 7 a2 2.56 2.92 0.101 0.115 e 2.41 2.67 0.095 0.105 b 0.69 1.01 0.027 0.040 e1 4.88 5.28 0.192 0.208 b1 0.38 0.97 0.015 0.038 4 h1 6.09 6.48 0.240 0.255 6, 7 b2 1.20 1.73 0.047 0.068 l 13.52 14.02 0.532 0.552 b3 1.14 1.73 0.045 0.068 4 l1 3.32 3.82 0.131 0.150 2 c 0.36 0.61 0.014 0.024 l3 1.78 2.13 0.070 0.084 c1 0.36 0.56 0.014 0.022 4 l4 0.76 1.27 0.030 0.050 2 d 14.85 15.25 0.585 0.600 3 ? p 3.54 3.73 0.139 0.147 d1 8.38 9.02 0.330 0.355 q 2.60 3.00 0.102 0.118 d2 11.68 12.88 0.460 0.507 6 ? 90 to 93 90 to 93 e 10.11 10.51 0.398 0.414 3, 6 13 2 d d1 h1 q detail b c a b l e1 lead tip l4 l3 e e2 ? p 0.015 a b mm 0.014 a b mm s eating plane c a2 a1 a a a lead assignments diode s 1 + 2 - cathode 3 - anode conforms to jedec outline to-220ac (6) (6) (7) (6) (7) view a - a e1 (6) d2 (6) h1 thermal pad e detail b d l1 d 123 c c 2 x b2 2 x b
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
